+- Hasleo Software Forums (https://www.easyuefi.com/forums)
+-- Forum: Hasleo Software (formerly called EasyUEFI Development Team) (https://www.easyuefi.com/forums/forumdisplay.php?fid=1)
+--- Forum: Hasleo Backup Suite (Free Windows Backup & Restore Software) (https://www.easyuefi.com/forums/forumdisplay.php?fid=10)
+--- Thread: WinPE problem on a Win 11 system (/showthread.php?tid=1520)
WinPE problem on a Win 11 system - khanyash - 07-31-2023
I installed HBS on a Windows 11 system. When I boot into HBS WinPE, it doesn’t display any backups. The system backup option under "Backup" and the select task to restore option under "Restore" are both grayed out.
RE: WinPE problem on a Win 11 system - khanyash - 07-31-2023
When I installed Windows, I had to load the storage driver because the installation didn’t detect the drive. I also injected the same driver into WinPE, but it didn’t fix the issue. Do I need to install the driver while using WinPE?
RE: WinPE problem on a Win 11 system - khanyash - 08-02-2023
Is the problem because of Intel Rapid Store Technology (IRST)? Do I need to disable it in the BIOS?
RE: WinPE problem on a Win 11 system - khanyash - 08-02-2023
I disabled IRST, which enabled AHCI, but the system crashed with a BSOD on boot. I then re-enabled IRST, and the system booted up with no issues.
It seems IRST is the reason for the problem. I think disabling IRST, which enables AHCI, and installing Windows would solve the problem.
RE: WinPE problem on a Win 11 system - khanyash - 08-03-2023
Enabling AHCI resolved the issues.
RE: WinPE problem on a Win 11 system - admin - 08-04-2023
(07-31-2023, 07:02 PM)khanyash Wrote: When I installed Windows, I had to load the storage driver because the installation didn’t detect the drive. I also injected the same driver into WinPE, but it didn’t fix the issue. Do I need to install the driver while using WinPE?
We recommend that you try to install the driver while WinPE is running, as shown in the image below:
RE: WinPE problem on a Win 11 system - khanyash - 08-05-2023
Enabling AHCI resolved the issues. I'll try installing the driver if I reinstall Windows with IRST enabled or switch to it. Switching modes deactivates one of my software licenses, and I will have to contact support again to reset it.