+- Hasleo Software Forums (https://www.easyuefi.com/forums)
+-- Forum: Hasleo Software (formerly called EasyUEFI Development Team) (https://www.easyuefi.com/forums/forumdisplay.php?fid=1)
+--- Forum: Hasleo Backup Suite (Free Windows Backup & Restore Software) (https://www.easyuefi.com/forums/forumdisplay.php?fid=10)
+--- Thread: Integrity Check of Disk Image will not stay seclected (/showthread.php?tid=2170)
Integrity Check of Disk Image will not stay seclected - jpcummins - 11-17-2024
I have Hasleo Backup Suite Free, version 4.9.3, installed. I verify the integrity of a backup image by selecting the below. By doing so, I expect the program to remember my choices. Acronis and Macrium Backup systems do but Hasleo does not. I have to enter these selections each time I do a backup. Is there a way to make the selections stick? I welcome all replies and thank you in advance.
1. Select Disk/Partition Backup
2. Select Backup Options
3. Select Advanced
4. Select Check the integrity of the backup image files on completion
5. Select Complete image check
RE: Integrity Check of Disk Image will not stay seclected - admin - 11-17-2024
Thanks for reporting the issue, we'll fix it as soon as possible.
RE: Integrity Check of Disk Image will not stay seclected - admin - 11-17-2024
(11-17-2024, 07:08 AM)jpcummins Wrote: I have Hasleo Backup Suite Free, version 4.9.3, installed. I verify the integrity of a backup image by selecting the below. By doing so, I expect the program to remember my choices. Acronis and Macrium Backup systems do but Hasleo does not. I have to enter these selections each time I do a backup. Is there a way to make the selections stick? I welcome all replies and thank you in advance.
1. Select Disk/Partition Backup
2. Select Backup Options
3. Select Advanced
4. Select Check the integrity of the backup image files on completion
5. Select Complete image check
We tested and it doesn't seem to have the issue you mentioned, are you sure you're using V4.9.3? Please note that you need to click the OK button after changing the setting to save it.
RE: Integrity Check of Disk Image will not stay seclected - jpcummins - 11-19-2024
(11-17-2024, 01:23 PM)admin Wrote:(11-17-2024, 07:08 AM)jpcummins Wrote: I have Hasleo Backup Suite Free, version 4.9.3, installed. I verify the integrity of a backup image by selecting the below. By doing so, I expect the program to remember my choices. Acronis and Macrium Backup systems do but Hasleo does not. I have to enter these selections each time I do a backup. Is there a way to make the selections stick? I welcome all replies and thank you in advance.
1. Select Disk/Partition Backup
2. Select Backup Options
3. Select Advanced
4. Select Check the integrity of the backup image files on completion
5. Select Complete image check
We tested and it doesn't seem to have the issue you mentioned, are you sure you're using V4.9.3? Please note that you need to click the OK button after changing the setting to save it.
RE: Integrity Check of Disk Image will not stay seclected - jpcummins - 11-19-2024
(11-19-2024, 11:45 AM)jpcummins Wrote:(11-17-2024, 01:23 PM)admin Wrote: We tested and it doesn't seem to have the issue you mentioned, are you sure you're using V4.9.3? Please note that you need to click the OK button after changing the setting to save it.
I do have V4.9.3 and I have clicked the OK button to save my selections. And, after doing this the program does verify the integrity as I want. But, the next time I run the program my selections are gone. I will wait for the next version, remove V4.9.3 using RevoUninstall, install the new version, and see what happens. As I said earlier I have had no problem with the selections verifying integrity with Acronis, Macrium Reflect, and SnapShop. So, it isn't as if I don't know what I am doing. Oh well, who knows...
thanks for replying.
RE: Integrity Check of Disk Image will not stay seclected - admin - 11-19-2024
(11-19-2024, 11:54 AM)jpcummins Wrote: I do have V4.9.3 and I have clicked the OK button to save my selections. And, after doing this the program does verify the integrity as I want. But, the next time I run the program my selections are gone. I will wait for the next version, remove V4.9.3 using RevoUninstall, install the new version, and see what happens. As I said earlier I have had no problem with the selections verifying integrity with Acronis, Macrium Reflect, and SnapShop. So, it isn't as if I don't know what I am doing. Oh well, who knows...
thanks for replying.
Did you restore the Windows OS and this option was not set in the backed up Windows OS? If not then we'll investigate this carefully.
RE: Integrity Check of Disk Image will not stay seclected - jpcummins - 11-20-2024
(11-19-2024, 12:50 PM)admin Wrote:(11-19-2024, 11:54 AM)jpcummins Wrote: I do have V4.9.3 and I have clicked the OK button to save my selections. And, after doing this the program does verify the integrity as I want. But, the next time I run the program my selections are gone. I will wait for the next version, remove V4.9.3 using RevoUninstall, install the new version, and see what happens. As I said earlier I have had no problem with the selections verifying integrity with Acronis, Macrium Reflect, and SnapShop. So, it isn't as if I don't know what I am doing. Oh well, who knows...
thanks for replying.
Did you restore the Windows OS and this option was not set in the backed up Windows OS? If not then we'll investigate this carefully.
No, I did not restore the Windows OS. I do full backups twice a month but have had no reason to restore.
RE: Integrity Check of Disk Image will not stay seclected - admin - 11-22-2024
(11-20-2024, 04:34 AM)jpcummins Wrote:(11-19-2024, 12:50 PM)admin Wrote: Did you restore the Windows OS and this option was not set in the backed up Windows OS? If not then we'll investigate this carefully.
No, I did not restore the Windows OS. I do full backups twice a month but have had no reason to restore.
It's strange that this problem can't be reproduced on our side, has anyone else encountered this problem?