+- Hasleo Software Forums (https://www.easyuefi.com/forums)
+-- Forum: Hasleo Software (formerly called EasyUEFI Development Team) (https://www.easyuefi.com/forums/forumdisplay.php?fid=1)
+--- Forum: WinToUSB (Best Windows To Go Creator) (https://www.easyuefi.com/forums/forumdisplay.php?fid=2)
+--- Thread: Disk or partition space is insufficient.(0x000000C2091E0000) (/showthread.php?tid=266)
Disk or partition space is insufficient.(0x000000C2091E0000) - feeldumb - 04-21-2016
I am trying to clone my windows 7 starter laptop to a Transcend 32GB 3.0 USB.
I just keep getting this error message
Disk or partition space is insufficient.(0x000000C2091E0000)
Any advice?
oops, can I delete this?
RE: Disk or partition space is insufficient.(0x000000C2091E0000) - admin - 04-21-2016
WinToUSB will copy all the files in source boot partition (Usually C: ) to the destination USB drive, so the destination USB drive must be larger than the used space on source boot partition.
RE: Disk or partition space is insufficient.(0x000000C2091E0000) - feeldumb - 04-23-2016
C was 25gb, usb is 32gb, did not work, how much larger?
RE: Disk or partition space is insufficient.(0x000000C2091E0000) - admin - 04-24-2016
WinToUSB requires that the destination boot partition must be 20% larger than the used space on source boot partition, so the real capacity of your USB falsh drive must be 30G or bigger, but the real capacity of a 32G usb drive is usually only 29.7G, so you need a bigger one.