@JayDee - some quick testing (W10) shows me that it finds the original drive lettered drive no matter where it is mounted (as you found), and I used (2) different sticks (same disk label, same manufacturer, same capacity) and tested it with different partition serial#s on each stick and it still found the proper stick and ran successfully.
I'll have to back off on my original supposition above about GUIDs based on that. I'll run one other test and report back... maybe the Devs can jump in here and clarify.
I'll have to back off on my original supposition above about GUIDs based on that. I'll run one other test and report back... maybe the Devs can jump in here and clarify.