Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Mount/Unmount Image
#1

.txt   ImageMountService Log.txt (Size: 11.71 KB / Downloads: 3)
I'm doing something wrong.  Ideas, what I'm doing wrong.  Thanks
https://www.wilderssecurity.com/threads/...st-3199019
Reply
#2
You have the same problem as me. https://www.easyuefi.com/forums/showthread.php?tid=2039
In post 6 you have a command to try. https://www.easyuefi.com/forums/showthre...13#pid5913
Reply
#3
1) found the driver file hasldisk.sys here > C:\Windows\System32\drivers\
2) found the registry entry for the driver here > HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services
3) Mount Image > Auto-assign > Proceed displays Mounted No & The operation completed successfully.
4) ran elevated CMD prompt, "net start hasldisk"
Microsoft Windows [Version 10.0.19045.4412]
© Microsoft Corporation. All rights reserved.

C:\WINDOWS\system32>net start hasldisk
System error 577 has occurred.

Windows cannot verify the digital signature for this file. A recent hardware or software change might have installed a file that is signed incorrectly or damaged, or that might be malicious software from an unknown source.


           
Reply
#4
The Devs may have to come up with another solution.  Since the entire installation package is unsigned, my guess would be that this new driver is unsigned as well.  I run a System that doesn't require driver signing so I never see that error.

We'll see how the Devs handle this issue...
Reply
#5
   
(06-17-2024, 12:54 AM)Froggie Wrote: The Devs may have to come up with another solution.  Since the entire installation package is unsigned, my guess would be that this new driver is unsigned as well.  I run a System that doesn't require driver signing so I never see that error.

We'll see how the Devs handle this issue...

Okay.  Thanks
as test:  I ran 4.8 installer to remove & reinstall 4.8.
Mount Image renders The system cannot find the path specified.
   
Edit: Okay.  I re-plugged my ext HDD.  
Now, Mount Image renders Mounted No.  This operation completed successfully. 
Unmount appears to work.  Only, my ext HDD won't safely eject.  This device is currently in use.  Something held in memory?  I have to Restart machine.  Sign Out does not help.  Restart machine...then allows ext HDD eject.
Reply
#6
(06-17-2024, 03:23 AM)bjm_ Wrote:
(06-17-2024, 12:54 AM)Froggie Wrote: The Devs may have to come up with another solution.  Since the entire installation package is unsigned, my guess would be that this new driver is unsigned as well.  I run a System that doesn't require driver signing so I never see that error.

We'll see how the Devs handle this issue...

Okay.  Thanks
as test:  I ran 4.8 installer to remove & reinstall 4.8.
Mount Image renders The system cannot find the path specified.
   

Edit: Okay.  I re-plugged my ext HDD.  
Now, Mount Image renders Mounted No.  This operation completed successfully. 
Unmount appears to work.  Only, my ext HDD won't safely eject.  This device is currently in use.  Something held in memory?  I have to Restart machine.  Sign Out does not help.  Restart machine, then allows ext HDD eject.

Edit: I stopped Image Mount Service and was able to eject. 
Reply
#7
(06-17-2024, 03:36 AM)bjm_ Wrote:
(06-17-2024, 03:23 AM)bjm_ Wrote:
(06-17-2024, 12:54 AM)Froggie Wrote: The Devs may have to come up with another solution.  Since the entire installation package is unsigned, my guess would be that this new driver is unsigned as well.  I run a System that doesn't require driver signing so I never see that error.

We'll see how the Devs handle this issue...

Okay.  Thanks
as test:  I ran 4.8 installer to remove & reinstall 4.8.
Mount Image renders The system cannot find the path specified.


Edit: Okay.  I re-plugged my ext HDD.  
Now, Mount Image renders Mounted No.  This operation completed successfully. 
Unmount appears to work.  Only, my ext HDD won't safely eject.  This device is currently in use.  Something held in memory?  I have to Restart machine.  Sign Out does not help.  Restart machine, then allows ext HDD eject.

Try restarting the "hasleo image mount service" to see if you can then eject the external HDD. It's in task manager in service. If it's ok, every time you try to mount an image you restart this service..
Reply
#8
(06-17-2024, 05:53 AM)lavande Wrote:
(06-17-2024, 03:36 AM)bjm_ Wrote:
(06-17-2024, 03:23 AM)bjm_ Wrote:
(06-17-2024, 12:54 AM)Froggie Wrote: The Devs may have to come up with another solution.  Since the entire installation package is unsigned, my guess would be that this new driver is unsigned as well.  I run a System that doesn't require driver signing so I never see that error.

We'll see how the Devs handle this issue...

Okay.  Thanks
as test:  I ran 4.8 installer to remove & reinstall 4.8.
Mount Image renders The system cannot find the path specified.


Edit: Okay.  I re-plugged my ext HDD.  
Now, Mount Image renders Mounted No.  This operation completed successfully. 
Unmount appears to work.  Only, my ext HDD won't safely eject.  This device is currently in use.  Something held in memory?  I have to Restart machine.  Sign Out does not help.  Restart machine, then allows ext HDD eject.

Try restarting the "hasleo image mount service" service to see if you can then eject the external HDD. It's in task manager in service. If it's ok, every time you try to mount an image you restart this service..

Yes, I just now found Image Mount Service...before reading your message.
Yes, I stopped Image Mount Service (Services Local) and was able to eject.
Thanks.
Reply
#9
Please check to see if the driver signature is missing?
[Image: attachment.php?aid=473]
Reply
#10
(06-17-2024, 11:28 AM)admin Wrote: Please check to see if the driver signature is missing?
[Image: attachment.php?aid=473]

Disabling Secure Boot seems to be the only way to be able to solve the problem at the moment, see:
https://www.easyuefi.com/forums/showthre...35#pid5935
Reply


Forum Jump:


Users browsing this thread: 7 Guest(s)