Simultaneous Scheduling Priority

[Froggie]

The test I performed was a simple Disk/Partition image of a single smallish partition on a multi-partition disk... restorations were always attempted in Partition Mode.

[Gork]

@Froggie, Yes, indeed. Thank you for chiming in. I really appreciate it.

[Froggie]

An observation... the chain integrity probe performed by the restoration operation is very fast, probably fast enough to perform prior to an imaging operation as well, without seriously affecting the timing involved.

Maybe this is the way to do an image chain integrity check prior to possible useless imaging into a broken image chain.

[admin]

We need some time to fix the issue. Thanks.

[Froggie]

Glad you're looking at it... <double> thanks! 

[admin]

Please try the fixed version below and see if the problem persists?
https://www.easyuefi.com/backup-software...250325.exe

Thanks.

[Froggie]

Using the offered v5.2.250325, when adding an INC to a broken chain, an error is now issued (as expected).  When restoring a broken chain, any time point after the chain break throws an error (as expected), any time point prior to the break in the chain is successful.

Great job, Dev Team... keep up the really good work 

[Froggie]

<Ooooops!!> Something broke in your v5.2.250325 release.  When using the Emergency Disk creator AND using the OffLine OPE file (I use this all the time), the following error message now appears...

Specified object not found. (0x00B50013000000B7)

When using the Microsoft downloads, all is fine.

[admin]

<Ooooops!!> Something broke in your v5.2.250325 release.  When using the Emergency Disk creator AND using the OffLine OPE file (I use this all the time), the following error message now appears...

Specified object not found. (0x00B50013000000B7)

When using the Microsoft downloads, all is fine.

I'm sorry that the program hardcoded the checksums for the WinPE components to be downloaded, so the OPE download tool needs to be updated. Maybe we shouldn't hardcode the checksums for WinPE components so that we can use any version of OPE.

[Froggie]

<Ooooops!!> Something broke in your v5.2.250325 release.  When using the Emergency Disk creator AND using the OffLine OPE file (I use this all the time), the following error message now appears...

Specified object not found. (0x00B50013000000B7)

When using the Microsoft downloads, all is fine.

I'm sorry that the program hardcoded the checksums for the WinPE components to be downloaded, so the OPE download tool needs to be updated. Maybe we shouldn't hardcode the checksums for WinPE components so that we can use any version of OPE.

...and there should be separate versions for W10 & W11 so the user may select what he needs.  I think I'm currently dealing with a driver issue that's different from W10-base to W11-base from Microsoft.