Hi!

I need to install Windows on a USB Flash Drive with GPT partitioning as my computer, a late 2013 Mac Pro, doesn’t boot MBR external drives anymore (well, actually it can boot special Apple prepared MBR, as seen with the Flash Drive prepared by the Boot Camp Assistant).

How could I tell to WinToUSB NOT to reformat/change partition type and keep the GPT scheme?

Or maybe someone knowledgeable would like to see the special MBR bootable Flash Drive and try to figure out how to put a WinToUSB prepared install onto?

Thank you!

I'm trying to install Windows 8.1 Pro to a USB hard disk and I get the following error message when selecting the disk in WinToUSB:

Sector size not supported. (0x057800C103900000)

Here is my user.log: http://pastebin.com/03FP7X4Z

I have tried this very awesome application for making my USB Hard Disk a windows to go.

What I have here is an ASUS notebook with usb ports: "usb 2.0" and "usb 3.0", and Seagate External Hard Disk...Of course for fast usage I've use the "usb 3.0" for running this application with my Seagate to install windows 8.1 pro.

I restart my notebook and boot my Seagate first, It runs fast and awesome. But whenever I try to plug my Seagate to my notebook's usb port which is "usb 2.0", it loads and showing me a sad face and an error: INACCESIBLE_BOOT_DEVICE....And whenever I plug it to the usb 3.0 again, it loads perfect....What that means??? It only allows me to use "usb 3.0".

Aside from the obvious, Windows XP support has officially ended, there is any other reason to not support XP? I'm making a system that will run a very old platform that only has XP support so I need it.

Hello,

I'm trying to install windows 8.1 to an external ssd 128 gb usb3.
When the process is 100 %. It doesn't boot. I did not try other version of windows but I don't believe this is the problem. I've made ntfs
Gpt two partitions as I've read on your topics but when I starting the usb creator, the program automatically format the hdd. Can you please let me know how can I do that step by step? Including the format and everything. I've tried to use the easyufei soft but with no luck. I didn't have all options like in your screenshot, even so, when it was 100% done, the ssd still doesn't boot. Secure boot and everything is disabled on bios.
[/align]
Thanks a lot

Ps: the laptop is a sony vaio duo 13 and I have no legacy option in bios

trying to load a win 8.1 64 bit iso, esd version onto a usb hdd...error 0x0000008000850000 comes up at 100% completed. win 7 64bit works fine...any ideas??

I have been successful in installing Windows 7 Ultimate 64bit on128gb usb3.0 flash drive. The problem happens once I attempt to run it.. The splash screen comes up and the drivers begin to install, once I get to 100% I get an error. Due to hardware on this computer setup cannot be completed. It basically reboots and starts the process over again with the same result.. I know that Windows 7 has issues with USB 3.0 so I have tried installing and running in a USB2.0 slot using the USB 3.0 flash drive with no luck. I even tried using my Windows 8.1 OS but I get a spinning wheel on boot that doesn't go away it seems. Any help is appreciated.

I'm trying to put the Windows 8.1 Enterprise evaluation version on a 128GB usb-3 stick. This boots fine on 2 of 3 computers. But the third computer just hangs without ever loading Windows - it freezes on a black screen with a cursor in the upper left. I suspect this may be because the stick isn't formatted gpt with a efi system partition (the two computers that work are bios), but if I do so before trying to install, wintousb insists I must format the stick before proceeding. It then creates an msdos partition table with just one ntfs partition.

So, how can I get wintousb to respect the partitions on the stick before install? If that's not the problem, how do I get it to load on the 3rd computer (which has no trouble in general booting from usb)?

Is it possible to make a WinPE ISO using EasyUEFI so that I can boot it on a UEFI system?
The current version refuses to run on a non-UEFI system but all I want to do is make a WinPE ISO containing EasyUEFI. Does Windows 7/8 already contain the correct EFI boot files or could you get them from a Win 7/8 install DVD which could be provided by the user?

Tried to put Win7 x86 and it's getting stuck on disk.sys and blue screens. Should I replace driver with something else?