Hi,

Do it is possible to use the easyuefic.exe (command line) for changing the boot order but only by knowing the name of a entry (not the index).

Exemple:
>EasyUEFIC.exe --list-efi
# Name
--------------------------------------
0 : USB Memory
1 : Windows Boot Manager
2 : HDD/SSD
3 : LAN
4 : Diagnostic Menu
5 : HDD Recovery

I want to place 3:LAN at the first. So i can use
> --top-efi --index 3

But i don't want to visually confirm the index number of LAN and it's is not always at Index:3. Hopefully, the name LAN is always the same.

So, do it's possible to use a command like
> --top-efi --name "LAN"
Or any workaround that do the same thing?

Ok, i know that it's a little bit ugly because in theory we can have multiple entry with the same name. But i can manage to have only 1 entry named "LAN", that's not a problem.

Thanks in advance and have a good day.
Sorry for my english.

Hi,

As my old USB stick was very slow I bought one of the fast GTX Voager USB stick without knowing that this stick is more like a mini external SSD as a normal USB Stick. It reports itself as disk so I read the guide on how to prepare the disk in order to use WinToUSB.

I first tried MBR mode with a small fat32 partition 100MB and a big ntfs partition but the stick always hangs at 95% of the install process (after copying the vhd file I use as starting point). It seems that it cannot create normal files to boot from. I then fiddled around and in the end (as my system runs from UEFI disks anyway) I used diskpart to wipe the disk, convert it to gep and create ESP/EFI partition and windows partition (interestingly a 128MB msr partition also got created although I did not opt for that). But here I have exactly the same problem installation stops at 95%.

Interesting thing I found out is, that once the installation reaches 95% you can not open any partitioning tool cause it hangs when trying to read the USB SSD Partitions. It's like WinToUSB somehow crashes access to the stick completely.

Best regards,

Marc

Hi,

I was unsuccessful trying to run my WinToUSB stick's image in Virtualbox so far (obviously I don't know how to correctly set it up, for example where to put the boot partition etc.).

So I though let's try the Windows To Go Upgrader because it does exactly what I need, creates a VirtualBox Image from the WinToUSB Stick. So I downloaded it and started the "check for upgrade" with a "Windows 10 Pro (x64)" GPT/UEFI WinToUSB enabled USB Stick. The process starts and creates the VM and tries to start it. At first I see the virtualbox logo and the turning dots at the bottom which everyone knows, but after about 5-10 seconds I get a BSOD saying "UNMOUNTABLE_BOOT_VOLUME". So, question is, whe isn't it able to boot? I'm using Virtualbox 5.1.20.

I would be even be willing to pay if I can boot the WinToUSB image so I can modify it. And it also seems that other people are having also big problem to boot a WinToUSB volume in Virtualbox if you look into the forum threads about WinToUSB.

Any help would be greatly appreciated.

Best regards,

Marc

Remotely I often have to deal with reinstallation and more often there is not a boot stick
So in this program, I found a great solution. Thanks.  
But there is one caveat, during the reinstallation on the current system at the end of the first part of the installation the computer shuts down as there is checked.
So my question is how to make so that it was not switched off and rebooted and continued the installation?  

Hi,

Windows installation from ISO file to USB is failing with the following error message:

Failed to run system API.(0x03F0001500A60000)

This happens right when it reaches 100%. I have tried twice.

Please see the attached log file.

Thanks.

The other day, I installed WinToUSB for the purpose of being able to use windows on other macs without bootcamp. The process was smooth, I put windows 10 on a partition of a large external hard drive that I had, and when I restarted it and opened up that copy of windows on my mac, everything worked pretty well. I installed the driver for the network adapter, and I could access google, etc.

However, when I plugged in the hard drive to another mac, I was unable to connect to the wifi. This mac is about as old as mine, so I thought I should see no difference, yet when I look under the devices for the network adapter, it tells me that it is unable to start, and so I can't access the internet on windows for that laptop. I tried a bunch of things, like un/reinstalling the driver, but nothing seems to work and google is quite sparse with information on this. If anyone has any answers, that would be great!

The first laptop, mine, is a mid-2014 macbook pro with bootcamp, which is what I used to get Windows on my hard drive
the second laptop is an early-2015 macbook pro, which is very similar, hence my confusion as to why it's not working.

Hi!

I've created a Multi-Installation USB with WinToHDD. I boot the PC from the pendrive (legacy from boot options) and choose 32bit or 64bit. When I click on the New Installation, it says:

Failed to get operation system information. (0x0000009202C70000)

It happens regardless of what iso is on the pendrive (Windows 7,8), the same message if there aren't any iso files. What is the cause of this error?

A big change on version 1703 is that windows can now read multiple partitions on a normal flash drive.

Wintousb 3.5 will now install a uefi install on a standard flash drive - no longer needs special drives with hard disk bit enabled.

How do I get a bootable USB stick created?

I keep getting the following error:

Failed to run system API.(0x03F0001500610000)

Here is my Error Log file (user.log):

https://www.dropbox.com/s/y9xeewzqz00hozo/user.log?dl=0

Please help me.

Thank you.

Attached Files

Thumbnail(s)
   

  user.log.txt (Size: 123.58 KB / Downloads: 2)

Am Attempting to install from an ISO image to a Samsung 128 GB Evo Plus Micro SD. Have already succeeded with a San Disk 32 GB Micro SD but now only get Unsupported File system.(0x0570009004590000) error. Have tried pre formatting to FAT32 and NFTS. Have tried reducing the primary partition on the card to 32GB - all to no avail. Any suggestions?? The really annoying thing is that after the error EaseUS shows the entire drive formatted as a WINTOUSB drive!