I bough a Sandisk Extreme Pro USB Stick which I use with WinToGo and Bitlocker Encryption. Worked very fast for one month, until the whole system slowed down. It seems that the Stick does not support TRIM. Is there any software alternative that I can use?

Well,
I have a samsung ssd and i used a usb3.0 to sata cable to create a WinToGo USB Windows installation.

And I am very satisfied with the results. But I wonder:

Is it possible to remove ssd from usb cable and put it inside the pc chasis -with a sata and a power cable off course

will it boot????

I have a witogo windows installation and i'm trying to clone it
to an internal SATA3 SSD

I choose clone => choose => which system to clone => I choose partitions => then it tries to create the WinPe

Just before reaching the end we have an error : 0x000000F500CA0000

"cannot update WIM. file"

I tried with A/V disabled and/or admin permissions but the error insists....

Please help!!!

Hi, I've been using a 128gb USB stick as my main HD for about a year as my eMMC32gb sucks.

but now I cant boot getting the following error
is there anything I can do without a Format and fresh install??

"Your PC/Device needs to be repaired

The Boot configuration Data file is missing some required information"

File \BCD
error 0xc000000d

Youll need to use recory tools etc etc"

any help please. ....Sorry using Windows 10 Home 1607

Hello,

I created a Windows 10(x64) To Go VHD and it boots fine on my USB and HDD but won't boot on my SSD that has Win7x64 installed. I get the error about winload.exe not passing integrity check, or a disk read error. The strange thing is that it will boot from the boot entry on my other HDD. I just can't get it to boot from bootmgr on the drive it's actually on. (So the VHD file runs fine.)

When I boot from the Windows 7 partition, and choose Win10-to-go, I get the winload.exe error. When I mark the partition with the VHD as active and boot to it I get a disk read error. When I boot from a bootmgr partition on another HDD with WinToGo.vhd in the BCD it boots fine.

All my disks are MBR NT 6.x. All partitions boot with bootmgr. I have no GPT disks and my ASUS UEFI Bios boots in legacy mode. I have no separate boot partitions. Each partition has it's own bootmgr and BCD. Win7x64 is on first SSD partition, Win10 to go VHD is on second partition.

What am I doing wrong on the SSD?

Images attached: BootIce BCD information, and Disk configuration

Update: I tried booting with VHD mounted (shown in attached image as drive F) and unmounted. No difference.

Attached Files

Thumbnail(s)
       

I've just downloaded a Windows Insider build that I would like to experiment with. I used WinToUSB to select the ISO and the USB drive and that all seemed to work as expected. When restarting my laptop attempts to boot from the USB drive but displays an error saying that the software or hardware has changed. I'm using the same laptop and haven't changed any hardware or software.

Can anyone tell me what might be going wrong here?

Trying to boot win2usb on surface book 2 using 256gb externall ssd drive over usb.. adata one. Boots fine first time but on installing updates the machine won't boot again gets stuck with the spinning dots and no further or gets stuck in automatic repair but doesnt do anything. Wipe drive start again and same thing happens.

Also couldn't do fat32 from cmd in windows so had to use a 3rd party tool could that be it? Almost there but not quite.

I'm attempting to use WinToUsb Free to install a Windows 10 Insider Preview Build to a USB drive. I heard about WinToUsb and it sounded like a great tool, and I understand that it's free for non-commercial use.

When I select the .iso file, it asks me to choose what version of the OS I'd like to install. Regardless of what I select, it tells me that free/trail version doesn't support Windows Enterprise/Server operating systems....which is fine. I just want to check out the insider build without messing around on my home PC.

Am I misunderstanding the licensing, and can someone tell me how much I would have to pay to get this to work?

Thank you

Hi! This is my first post and I made my due diligence searching the forums but I couldn't find anything related so I'd like to ask for your wisdom.

There's a post made as a resource posted from roughly a year ago ( https://www.easyuefi.com/wintousb/resour...acted.html ) talking about how 4k sector read/write speeds are quite important when choosing a USB memory stick to be used as a Windows to Go installation. But there's no mention as to what would be considered a good speed (going outside the certified devices route here...).

For example, I found one that had a decent sequential performance (in the 200 MB/s range) but its 4k speeds were barely 0.1-0.2 MB/s.

So my question is what would be good enough and what would be preferable or desirable?

I could always go the SSD way, but if possible and with a constraint budget I'd rather have a small footprint device I could carry with me all day.

Thanks anyway for your time and for reading me.

Hi,

I bought a 2TB SHDD to replace my 500MG SSD with is running out of space. My plan is to do a fresh install of Windows 10 64bit and all my programs and then move all my user data over on the new drive mounted externally... when all is done I would then swap the old drive with the new install. This would minimize the downtime and make sure I have a light and clean initial system on this new drive ready before installing it.

Is WinToUsb appropriate to build Windows 10 on my external drive before installing it in PC? Would the old drive be bootable to once it is installed on the same external usb3 enclosure in case I need to run program there later?

If there cons to doing this, I would then use my usual approach, bootable WIndows10 instal thumb drive (using Rufus) and install new drive in the laptop and apply a clean install to it. Carry with the same as above.

Thank you,
Donat